"Pebble" Inclined Happysoap stand with drain

Nice little, rounded, and thought-out soap holder for the Happysoaps I have at home!

The shape is rounded and the soap bar sits inclined, this makes for easier grabbing of the slippery bar, and benefits the drainage of the soap! The raised edge at the bottom prevents it from sliding down and has a curve to it to force the soap to lay in the middle so it does not fall off the sides.
The soap icon on the backside allows air- and water to flow at the back to get it dry as soon as possible

The drain is located at the bottom and the feet are raised so the bottom of your print does not get moldy/dirty!! Additionally, I've made a little tray to put the stand on, to allow for a little catch tray, and a cheap option to print again if dirty!
Also indented the sides to allow for firmly gripping.

Due to the solid shape, it should be able to handle the dishwasher at 30C once really dirty.

Designed for Happysoaps (60mm round, 20mm thick) but might work for others, let me know!

The tray can be printed without supports

Pebble is designed to print without supports except for the base, sides, top and visible edges are support free!

(Photos will be added later)