Split Loom Wire Mounts

Designed these to work with 3/8 inch (Automotive style) split wire loom. It works SO much better than the stupid plastic twist around wrap. Looks better, works better, is easier to service also if you need to pull a wire for some reason. Also easier to work with and deal with than the chain link tracks are. Do need to mount solid at each end so as to avoid high flex and damage entering and exiting the wire loom material.

The bed mount has no hole it it, you will have to drill/poke your own. there are way too many different bed systems to make one hole for all. do make sure the lip is tight tho the bed carriage so it doesn't move ..

The frame mounts are for 2020 aluminum frames -
there is a bed mount - 90º angle which work for the bed.
There is also a angled one that is good for the top wires coming off the print head and mounts to the top bar of the printer.(had an issue with the printer with mine but it's fine so using it.. yours should look cleaner)

Print instructions

Unassociated tags: auto wire loom, wire loom, wire management
Category: 3D Printer Parts