Sliding Tee Mount for 3/4" EMT Conduit

These allow a sliding Tee or "H" joint for EMT construction. I used them on my portable solar panel project for the legs and they work great. You might want to up the perimeter walls a bit for added stiffness, I used 4 with 25% fill in PLA. Use the Conduit Connector fastener from my website for easy EMT construction. https://targetforge.net/shop/ols/products/34-emt-conduit-hardware/v/CND-TO

Cheap, easy, adjustable!

Tons of uses, a table, solar panel legs, etc..

One M4 X 12mm screw and nut for each bracket.