Ford Fiesta MK6 ST150/XR4 Jacking Point cover (Front)

Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166).

It is not an exact replica but a version optimized for easier printing and more robust mounting.

The cover has to be post-processed further:

• support material has to be removed
• (optional: check that it actually fits before continuing with the more labor intensive work)
• sides and outer wall has to be sanded down to have a smooth surface
• surfaces have to be cleaned carefully to remove any oil or dust
• use primer to prepare the surface
• paint it with the same color as the side skirt
• use clear lacquer to finish the cover

Print Settings

Printer:

Qidi X-MAX

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.08mm

Infill:

30% Gyroid

Filament:

white

Notes:

The support was printed with an Support Interface to make it easier to remove it. The wall count was increased to 4 to improve the stability and have more material which can be sanded down.