Lucky 600 Printable Jointed Figure

So that you don't make the same mistakes that I had done, I have split most all of the armature parts in half so that they can be easily assembled without risk of snapping the open ends of the ball joints. Parts are modeled to be assembled with McMaster-carr M4x0.5 14mm socket head screws. 

Recommend for the skin parts for the hands putting a -0.1 XY offset so that they fit in better when inserting into the hands.

For the palm, just mirror within your slicer to print the opposite hand.

Printed mine with 4 perimeters on for added strength and 20% infill, but use whatever you like.

Any remixed parts for the original Lucky 13 will work if scaled to 600% in your slicer.