FGC-68 T15 Hi CAP adapter

this Hi cap adapter does work. but you have to keep in mind that there is more of a chance for a mis feed. if there is something not right. since the mag haves to push 5 more paintballs up then normal. so it’s maybe pushing the limit of the spring a bit. but it worked for so far I have tested it.

keep in mind that this is only for ROUND BALL use!
both the V1 and V2 mags should work

do keep in mind there is also a T15 lower in the works that one have to push only 1 extra round up. so that should be more dependable.

and there will also a Upper and lower set that can shoot first strike rounds with the use of FSR capable TIPX/TCR internals.

but the nice thing about this one is that it’s flexible on the fly TIPX, T15, TMC all chanced out as fast as you can reload basically…

ABD installation video:
https://www.youtube.com/watch?v=5IxGVSHOZ00&t=3s
this part is need so you will not lose those 4 paintballs every time you do a reload.

parts needed:
1x M2 bolt in a length of 20mm (mag release paddle)
1x m2 bolt in a length of 16mm (mag catch)
spring mag catch 6mm OD, 10mm long, 0.6mm wire

ABD parts:
metal pin you may like to add a bit of super glue so it doesn’t slide out
spring 4mmOD, 5mm long 0.4mm wire

for more parts look at this collection:
FGC68 MKI
https://www.printables.com/social/180009-untangleworks/collections/88907

FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908

videos about the FGC68 Hi CAP TMC
https://youtu.be/cSBZL6h9LCE