CR-Touch Mount for Manta MK2 Duct & Tool Head System

Whilst installing the brilliant Manta MK2 system by boothyboothy recently I came to realise my bed levelling probe of choice, the CR-Touch, wasn't wholly compatible with the provided mounts due to plug/wiring location in the top of the probe.

This is a rough first draft remix of the originally provided BLTouch centre mount part, with adjustments made to better suit the plug recess.

I have tried to retain boothyboothy's design style in making this.

Things to note:

• Probe Y offset should be approx 39.96mm, slightly more than the BLTouch version (BLTouch pin is centred between it's mounting screws, CR-Touch is bulkier and probe pin is offset)
• This is a first draft, and the area the Manta setup allows for a centre mounted probe is cosy (particularly if using 5015 fans). If you are having clearance issues, feedback is welcome
• The CR-Touch is roughly 2mm shorter overall than the BL-Touch. I have not allowed for this difference in the design, you may be able to compensate using the existing vertical screw slots, or print off a spacer

Todo/Wishlist:

• Print a copy of my own and test/upload photos - will do once my hot end is back together & operational
• Iron out any obvious clearance/offset issues
• Provide editable file if requested
• Off-centre version?

Thanks to:

• boothyboothy of course, not just for the Manta MK2 project but ongoing dedication & contributions to the 3D printing community
• Klaus Massler, whose CR-Touch model (via grabcad) was very useful as a reference