//English +//Italiano
//English
Parametric toothbrush holder for Braun Oral-B iO Series 9n and others
brushes to keep them straight in other containers or on their own.
Tested with the mlax toothbrush holder
htps: //www.printables.com/en/model/66768-toothbrush holder-3x/files
The "mlax" design served for several months, but when we replaced an old toothbrush
with the new Oral-B iO series 9n we felt the need to keep it straight and firmly in the container.
The model is fully parametric and can be inserted inside the mlax model but also in other toothbrush holders or even used independently modifying the dimensions of the base and the height as desired.
We are studying OpenScad and only with this tool parametric support was possible for any toothbrush and any container.
Even if you've never used OpenScad you can make the holder for your toothbrush
quite simply: (download OpenScad: it's Open Source)
a) from the OpenScad Windows menu disable the "Hide Customizer" check box.
b) in the right window choose the values
c) press F5 to view the result
d) keep changing the values until you are satisfied
e) press F6 to render and F7 to export the .STL file
f) pass it to the slicer and print!
Report errors and / or requests to [email protected]
Model "A" was generated with
box size 37x46
box height 50
brush diameter 29.5,
support height 50 (like the box)
displacement 0
model "B" was generated with:
box size 37x46
box height 10
brush diameter 29.5,
support height 50
displacement 15
For other values: experiment!
Care must be taken with the measurements of both the container and the toothbrush.
If this holder is wide in the container but tight around the brush, every time you pull out the brush, take the holder with you.
We fixed this with a few half turns of duct tape (white) around the stand to secure it firmly.
The test form was cut in PrusaSlicer to accurately verify the measurements before printing the final model.
ADDENDUM 26-06-2022 Added version 1.1 with some changes suggested by our best knowledge of OpenScad and by a request: To be able to use toothbrushes that are not round but oval.
//Italiano
Supporto parametrico per spazzolino Braun Oral-B iO Series 9n e altri
spazzolini per mantenerli dritti all'interno di altri contenitori o da soli.
Testato con il portaspazzolino di mlax
htps: //www.printables.com/en/model/66768-portaspazzolino-3x/files
Il design "mlax" è servito per diversi mesi, ma quando abbiamo sostituito un vecchio spazzolino da denti con il nuovo Oral-B iO series 9n abbiamo sentito il bisogno
di tenerlo dritto e ben fermo nel contenitore.
Il modello è completamente parametrico e può essere inserito all'interno del modello di mlax
ma anche in altri portaspazzolini o anche usato in maniera indipendente
modificando a piacere le dimensioni della base e l'altezza.
Stiamo studiando OpenScad e solo con questo strumento è stato possibile un supporto parametrico per qualsiasi spazzolino da denti e qualsiasi contenitore.
Anche se non hai mai usato OpenScad
puoi creare il supporto per il tuo spazzolino da denti
molto semplicemente: (scarica OpenScad: è Open Source)
a) dal menu Windows di OpenScad disattivare il chech "Nascondi Customizer".
b) nella finestra di destra scegliere i valori
c) premere F5 per visualizzare il risultato
d) continua a cambiare i valori finché non sei soddisfatto
e) premere F6 per eseguire il rendering e F7 per esportare il file .STL
f) passalo all'affettatrice e stampa!
Segnala errori e/o richieste a [email protected]
Il modello "A" è stato generato con
dimensioni scatola 37x46
altezza scatola 50
diametro spazzola 29,5,
altezza supporto 50 (come la scatola)
spostamento 0
il modello "B" è stato generato con:
dimensioni scatola 37x46
altezza scatola 10
diametro spazzola 29,5,
altezza supporto 50
spostamento 15
Per altri valori: sperimentate !
Bisogna fare attenzione con le misure sia del contenitore che dello spazzolino da denti.
Se questo supporto è largo nel contenitore ma stretto attorno al pennello, ogni volta che estrai il pennello, porta il supporto con te.
Lo abbiamo risolto con alcuni mezzi giri di nastro adesivo (bianco) attorno al supporto per fissarlo saldamente.
Il modulo di prova è stato tagliato in PrusaSlicer per verificare accuratamente le misurazioni prima di stampare il modello finale.
ADDENDUM 26-06-2022 Aggiunta versione 1.1 con alcune modifiche suggerire dalla nostra migliore conoscenza di OpenScad e da una richiesta: Poter usare spazzolini non tondi ma ovali.
The author hasn't provided the model origin yet.