SKADIS - IVAR Mount
SKADIS mount for IVAR: tight fit, optional M4 nuts. Print in PETG, needs 8 M3x20 screws. Pre-drill wood to avoid cracks.
In the contest Last Meters
55
111
3
1555
updated
April 26, 2024
Description
PDFSKADIS fits IVAR perfectly, requiring only these four little additions. The hole in the mount is tight enough to secure the pegboard without a nut, but you can always add an M4 nut for extra security.
Print in any material; I used PETG with 3 perimeters and 20% infill.
You'll need 8 M3 x 20 wood screws. M4 nuts are optional. Pre-drill 2mm holes in the wood to prevent cracking.
Tags
Model origin
The author marked this model as their own original creation.
