EasyMeter Q3 Adapter (ESP Lesekopf

This is an adapter for the EasyMeter Q3 series power meter. It is to adapt DIY-style IR-readers. In my case the "ESP Lesekopf".

Print this, so the depression for the washer faces up. Then no supports are needed.

After printing insert a M12 washer into the depression in the lower side.

DISCLAIMER:

To have access to the diodes you first have to remove the seal on the top side of your meter. This is a safety-seal so your power company will know you tampered with it. Be sure to ask for your power companys permission first. I am not responsible for anything that happens.

Print Settings

Printer:

JGMaker Magic

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0,2

Infill:

15%

Filament:

white