Multi color SpaceX Coaster

This is a remix of the original model in Thingiverse
(thing:3222915 ).
I changed the height of the bottom of the honeycomb cells pattern in respect to the base of the X to do a color change in the SpaceX logo.

There are 2 versions of the same model, one with 0.2 mm of separation and other with 0.4 mm.

Print instructions

If you select to print this coaster via the .gcode files I recomend you to go to the user User print files section, there are all the variations I made.

The difference of every file is

1. The space between the bottom of the X and the bottom of the honeycomb pattern
2. The number of layers of the filament change
3. The layer height

If you select to use the stl files. you only need to add a filament change 2 or 3 layers under the top layer of the stylized X, then add a second filament change just in the layer above the X

Colors Recommended
1.-Black
2.-White
3.-Black