Lil Hyper V4t (Picatinny)

Lil Hyper V4t- a variant of the Big Hyper V4b that now has a long standard picatinny rail on top and a short rail on the bottom. The V4 files are getting kind of cluttered, so i'm posting it in a seperate page.

ASSEMBLY-

The blaster prints in four pieces, two on each side. I recommend using support blockers to keep Cura or whatever plebeian alternative slicer you use from generating unnecessary support. When you finish printing one side the two pieces will attach with up to 4 M3 screws. Once both sides have been screwed together individually you can put the internals in and screw the clamshell together like any stock blaster.

PERFORMANCE-

Depends on how modified the internals you use are. I've seen as low as 40fps from crusty thrifted stock internals and as high as 90 from lightly modded internals. I may design a printed brass coupler at some point.

REVISIONS

-10/20/21 uploaded STEP files.

if you have problems with anything, PM me on reddit (u/Zealous_Echo93) or discord (@noreason#4172)

the T in V4t stands for Toad or picaTinny rail

Ask before selling.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: Novamaker PLA Green

Notes:

use support blockers where desired