Belt
Description
PDFThis is a 3-part fully printable belt. The main strap must be printed in TPU and the buckle in rigid plastic (seen here in PLA). To assemble the buckle, insert a piece of 1.75mm filament into the two buckle parts and secure by melting the ends with a hotend or super glue.
EDIT ON ONSHAPE with a free account
*All parts print without support
Post-Printing
Assembly
The main strap must be printed in TPU and the buckle in rigid plastic (seen here in PLA). To assemble the buckle, insert a piece of 1.75mm filament into the two buckle parts and secure by melting the ends with a hotend or super glue. Wrap the end of the strap around the buckle and glue to secure. Cut end of belt strap with scissors to desired shape and length.
*All parts print without supportTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.