The SP1 Eurorack Case - a modular 3D printed Eurorack Case

About The SP1 Eurorack Modular Case

Why to be limited to modules when it comes to a flexible modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup up to the fully fledged modular home system...or even combine a stationary system with a mobile system. The SP1 can be extended vertical as well as horizontal.

Features of the SP1 Eurorack Modular Case

• Flexible modular case design
• 3D printed and use of standard Eurorack thread profiles
• Horizontal Extendable
• Vertical Extendable
• Build in cable shaft on the back (shaft is accessible with the modules SP1H10CC or SP1 H10DCC)
• Light Weight
• Good Cost/Performance Ratio
• Horizontal or angled desktop position*
• 70mm module depth

Current available SP1 Eurorack case modules:

• SP1H10 - Standard 10 HP 3U Eurorack Module
• SP1H35 - Standard 35 HP 3U Eurorack Module (only STL file download)
• SP1H10VC - Standard 10 HP 3U Eurorack Module with vertical connection and cable holes
• SP1H10HC  – Standard 10 HP 3U Eurorack Module for vertical connection and back pillar
• SP1H10RC - 10 HP 3U Eurorack Module with right cover
• SP1H10LC - 10 HP 3U Eurorack Module with left cover
• SP1H25GM - 25 HP 3 U Eurorack Module with Grip
• SP1H10CC - Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft
• SP1H10DCC - Standard 10 HP 3U Eurorack Module with double cable opening
• SP1Cap10 - 10 HP front cap
• SP1Cap25 - 25 HP front cap
• SP1CapRC - 10 HP front cap with right cover
• SP1CapLC - 10 HP front cap with left cover