Humans!!! Organizer Insert similar to Zombies

Remixed, rather redesigned, but based off of the Zombies!!! organizer found here: https://www.thingiverse.com/thing:2751411

I reused the tile map tray, but the main organizer drawn from ground up. There are six compartments for the player character zombie figures. Two of them are slightly larger due to the cheerleader and wrestler zombie figs being slightly larger in space requirements. There are three smaller cubicles for the barricade and ‘dice’ chips as well as the dice. They could all fit into one cube, but organize as you see fit. The bottoms of these small cubes have a radius all the way around so it is easier to scrape out those last little pieces instead of them getting jammed in a sharp bottom corner. 

The two large areas are for the NPC human figures and the card decks. The main card deck goes in the card area first and then a little divider tray goes on top to hold the two mini decks. The divider of the tray sticks up nicely to grab hold of and lift the tray out. I like to sort of press down on each deck (pushing them against the base of the tray) with my fingers while pinching the divider. It serves to hold the decks in place while lifting or while inserting.

There are two versions, one with 1.2mm thick inner rib/divider walls and one with 1.5mm. The difference is slight, but makes a difference based on print speed, durability, and which nozzle size you're printing with. I made mine with 1.5mm because I'm printing on a 0.6mm nozzle. The 1.2mm version would probably print faster and easier on a 0.4mm nozzle, but of course YMMV.

Overall it's a tight fit into the cardboard box, but will easily fit and print on an Ender3 or Prusa i3 type machine as it is 219x144mm (8.64x5.69in).