Christmas Tree Tap Handle

Everything prints without support. Print the threaded piece (Tap Threads.stl) at a low resolution, slowly - you'll want good layer adhesion.

After that, pick whether you want ornaments on your tree or not, and print parts 1-6 of either "Tree" or "Tree Decor". Use bare minimum infill, 0.2mm layer height, 2 shells, etc.

Glue everything together, widest parts on bottom. Paint as desired.

Print Settings

Printer:

TronXY X1

Rafts:

Supports:

No

Resolution:

Infill:

10