The IKEA FÖRBÄTTRA toe kick cover normally is installed quite far away under the kitchen cabinet. To have it more in the front I designed a 5 cm longer version as a replacement for the METOD holder. See original part in the photo on the right side.
If you print it, I would be happy if you let everybody know and upload some pictures.
Feel free to modify the model but please upload improved versions!
Rafts: Yes
Supports: No
Resolution: 0.2 mm
Infill: 20 %
Notes:
You might have to use a raft to keep the part sticking to the surface while printing.
I made the clamp a little thinner than the original to keep it from breaking while being attached to the foot. The part printed in PLA is more brittle than the original PP from the IKEA part.
The author marked this model as their own original creation. Imported from Thingiverse.