KP3S — Maintenance Pillar — Kingroon

A maintenance pillar to support KP3S body placed sideways.

It is placed under the aluminum profile of the Z-axis and is used for opening the bottom panel, etc.

Sizes

Height ─ 170mm + 4mm (protrusion at the top)
Width x Depth ─ 20 x 20mm (body part of the pillar), 60 x 60mm (bottom)

Print Settings

Brims/Rafts ─ Doesn't Matter
Supports ─ No
Wall Thickness ─ ≥1.2mm
Top/Bottom Thickness ─ ≥1.2mm