Qidi Tech Mk10 Dual Top Plate

After switching to 4mm push-connects for filament routing, I hated having to press the tube in and out of the orange adapters seen in the OG top plate. You can thread the connectors right in and strain relieve the cables at the top.

Print Settings

Printer:

Qidi Tech 1

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.2

Infill:

20% or greater

Filament:

Any

Notes:

Steppers can get a little hot during long prints, so higher melt temp mat'ls are best.