CHONKPAD MurphPad Case

Case for the MechWild MurphPad.

-7 printed parts

-6 phillips head screws (from MurphPad kit labeled MP1)

-4x M3 8mm (Optional for stiffer frame)

-4x M3 12mm

-4"x4"x1/4" slot for acrylic, brass, steel,etc.

-Uses the adhesive rubber feet from MurphPad Kit.

The MurphPad can be found here: https://mechwild.com/product/murphpad/

Step1- Three MP1s screw in from the back side of the PCB once the side pieces are inserted.

Step2- These four M3x8 hold the frame together and ~could~ be optional

Step3- Four M3x12 screw the from to the top of the case. Indents are available for o-ring mount. Use four MurphPad screws to secure the weight or acrylic block to the bottom of the case.

Step4- Slide the bottom piece in from the back and secure with two MurphPad screws.

Designed by CustomNiches

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: SUNLU PLA - Carbon Fiber Black How I Designed This ===================