Toaster Handle

The very first thing I designed on OnShape and printed on the free Anet A8.

Simple handle for the Sunbeam toaster; the part you push down to start to start toasting. Much better then pushing down on bare metal.

Print as per the picture; 1.2mm shell and 30% infill.

No brim or raft needed.

Glue on using Urethane (i.e. Gorilla Glue) or Epoxy

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

No

Resolution:

0.15mm

Infill:

30%

Filament: Any PLA Black

Notes:

Use 1.2mm shell and 30% infill

Using OnShape