Ordered a new DU Bushing (Rear Shock Eyelet Bushing); plus a DU Bushing Tool for my for my mountain bike.
The bushing showed up, but the tool never did......
So I decided to try a 3D printed one; which worked surprisingly well.
Use a 4mm or 1/4" threaded rod and nuts and washers
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Any PLA Black
Notes:
I printed with at least 1.2mm thick walls all round and 30% infill; but the parts did crush a bit when used. So use thicker walls or 100% infill.
The author marked this model as their own original creation. Imported from Thingiverse.