DU Bushing Removal Tool Fox RockShox Shocks
Description
PDFThis is for the 1/2" size DU Bushing for Fox and most other brands of rear shock
Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never did.....
Decided to try printing one and found out that it work out quite well.
Pictures show the tool after I used it and so they are a little bit crushed.
Use a 4mm or 1/4" inch threaded rod with some thick washers.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: ANY PLA Black
Notes:
Print with at least 1.2mm thick walls and 30% infill; but it maybe better to use thicker walls or 100% fill as mine crushed a little.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
