Brake Lever Clamp 22mm Bars

Use at your own risk. Strongly suggest you print in Nylon or similarly strong material.

This was designed as a temporary mount, until I get hold of a metal replacement, or finally get a mini CNC.

Designed for 22mm bars and the spacing of the holes is 32mm.

There are two styles, rounded and squared off. Narrow and wide versions.

Print on it's side and use supports for the holes.

23Aug21

Made a minor change to the design. The V1 STL's have had 1mm removed from the bottom as I found there wasn't enough gap between the halves to get a good clamping force.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

Yes

Resolution:

0.10mm Layer Height

Infill:

20%

Filament: Any Nylon recommended

Notes:

Print on the side.
Use supports for the holes.