Mudguard Bracket 700C, 44 mm Wide, Flinger Brand

A rough copy of the mudguard bracket for the 700C x 44mm wide, Flinger branded, mudguards.

This bracket is on the rear mudguard, but can be used on the front as well.

I have made the mounting tab thicker (3mm) and added some larger fillets to make it stronger.

The rear guard works brilliantly, but the front guard still lets some water splash up on the frame and your bottom bracket.

I'll be using this on the front guard, so I can rotate it further back, so the rear edge is lower to the ground. This should help reduce the splashing even more.

Will upload some pictures in the near future as well.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

No

Resolution:

0.2mm layers

Infill:

20%

Filament: Any PLA or PETG Black

Notes:

May need some brim to help adhesion. PLA works fine, just don't leave the bike out in the hot summer sun...