V-Slot SD Card Holder

Update 13 Feb 2021 - Added a Combined Holder that has 1 SD, 1 USB and 4 microSD slots in a single strip.

Update 8 Oct 2020 - Added a 100mm blank strip you can scale yourself to fill in any gaps on your machine in the same style. In Cura, disable "Uniform Scaling" and change the X-axis to what you need.

Update 22 Sep 2020 - Added a v2 design of both parts that takes a little longer to print but extends further into the slot, to hold the cards more upright. It also makes the parts click into the v-slots a bit more firmly.

Update 21 Sep 2020 - Added a design for an "adapter holder" with full sized SD card and USB slots. Thanks for the suggestion and testing mfann72.

Very simple v-slot cover with slots to hold SD Cards. Install this where you like. My photos are on the extrusion by the Z-axis sensor of the Ender 3 v2.

It's 100mm long and presses into place easily.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Infill:

15%

Notes:

Print upside down and no supports needed. It should be orientated this way already in Cura. Infill should not matter as it's mostly wall, but I used 15%