MKS TFT32 Display adaptor Ender3, 5, clones, ect.)

This is a super simple bracket to adapt the stock display mount on a Ender 3 or similar machine. It should take at most 3hrs and ~15g to print, so is very simple.

This design is not perfect. STEP file is included incase you want to modify it easily.

V2.1

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

No

Resolution:

200-300 microns (doesn't matter really)

Infill:

20%

Filament: X3D pro PLA Translucent Blue Post-Printing =============

Assembly

REQUIRED COMPONENTS (not including stock lcd mounting hardware):

2-4 m3*12mm bolts

M3 washer - 1/6mm bolt, 2-4/12mm bolt

1. Remove old display
2. Prepare MKSTFT 32
3. Slide part onto the the display standoffs. It should be a snug fit.
4. Screw on if necessary with a M3*6mm and washer
5. Attach MKSTFT with 2-3 M3*12mm screws and 4(1-2 if adapter not bolted to the stock mount) washers each. They may need to go in at a slight angle.
6. Plug in AUX1 cable
7. Bolt mount back on with 2 M5 screws.

CAUTION:

Before printing check:

The SD card/USB can fit in with the bed sliding back and forth

The USB A socket does not foul on the extrusion

Nothing shorts

NOTE: This may not be comparable with the stock bed levelling screws