Prusa Lack Enclosure Bottom Extension

This is a remix of the original Prusa Ikea Lack enclosure.

It wasn't until I had cut the sheet of acrylic into the dimensions in the guide that I realized my Anet AM8 printer would be too tall to fit into the enclosure.

This will add about12-13 millimeters (1/2") of vertical clearance to the enclosure.

These replace the following parts from the original:

• Prusa_Enclosure_Door_Knob.stl
• Prusa_Enclosure_Bottom_Corners.stl (only the bottom halves)

The number at the beginning of the file name denotes how many copies should be printed. Note: For the door knobs and front corners print one as is and another mirrored.

To create a channel for cables I simply cut down one of the 6 bottom side channel pieces with side cutters.

Print Settings

Printer:

Anet AM8

Rafts:

No

Supports:

No

Resolution:

0.2 mm