Qi Wireless Charger Stand

This is a holding bracket designed to support a phone upright, or a small tablet sideways. It holds the generic circular Wireless Qi Chargers with space for connecting and routing a USB cable.

V9 has further cuts to reduce material use, although done in a way to improve prints through less bridging. Print time is now almost half that of previous versions.

The Qi Charger is centred at 65mm above the stands - so for optimum results the phone will be around twice that length if the internal charging unit sits half way up your phone. Mine is a Samsung S7 and it works perfectly.

The dimensions of the charger that it holds are as follow:

Outer Diameter: 70mm

Depth: 9.8mm

All the USB charging cables that I've tried have fitted with minimal persuasion - but I wanted it tight to ensure that it was held securely.

Print Settings

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2 mm

Infill:

25%