Phantom of the Opera Style Mask

A Phantom of the Opera style mask that I designed to be hung on the edge of a picture frame or mirror. It is based on the one that is actually worn by the Phantom in the show/movie so is the half face mask and as such should sit on the left side of the frame.

Size: 73.10 mm x 106.41 mm x 40.31 mm

Print with support at about 20% infill - my printer was fine printing the long bridged section, just make sure that you have really good bed adhesion as the overhanging side will tend to pull upwards towards the main body of the model where there's more plastic.