NightHawk GoPro/Camera Mount

This is a bracket for mounting your GoPro/generic GoPro looking 'Action Camera' securely to an Emax Nighthawk 250 Quadcopter at a 20 degree angle.If anyone wants any different camera angles let me know and I'll work up some other versions.

It uses the two existing front m3 bolts - which you may choose to replace with some slightly longer m3 bolts for added security - and two nuts and bolts at the back through the accessory slits/slots (?) on the upper frame, although you could just use some cable-ties/zip-ties and save some weight.

To reduce camera vibration, consider using some thin foam on the base and back support of the mount (probably fine without it though).

Finally add a Velcro strap or two and your +/- £250 GoPro should be about as safe as it can be strapped to the top of your £150 quadcopter with you flying it!

Print Settings

Printer Brand:

RepRap

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2 - 0.3 mm

Infill:

Notes:

I printed it without support and it did the bridges just fine. Don't worry about especially high infill, just increase the number of side walls and upper solid layers you print with slightly.

Dimensions

Widthways (across the frame) = 54 mm.

Lengthways (along the frame) = 33 mm.

Height = 20 mm.