Bruynzeel S500 screen door hinges with various offsets

After I installed my screen door (and created holes in my doorpost) I found out the door rubbed ever so slightly onto my floor mat. I recreated the stationary hinge and added some height offset so the door could clear the mat.

I also needed to increase the gap between the screen door and doorpost. The door-hinge bumped into the doorpost and bended the stationary hinges.

In the files section you'll find the "Bruynzeel_S500_hinge_original.stl" file - which is the original hinge recreated without any offsets.

The rest of the files have a offset applied to them, and the file naming convention is the following: Bruynzeel_S500_Hinge_XXXmm_height_offset_XXXmm_doorpost_offset

height_offset: The amount of offset you need to create more clearance between the screen door and the floor doorpost_offset: The amount of offset you need to create more clearance between the screen door and the doorpost

You can reuse the original pin to attach the screen door hingeparts.

Printed in PETG.

Fusion360 source files and interactive 3D model view: https://a360.co/2Kh95QC

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

No

Supports:

No

Resolution:

0.3

Infill:

20%

Notes:

Print in PETG for a strong part.