Labels for Contour ShuttlePRO V2

I recently got a Contour ShuttlePRO V2 to help with video editing in Final Cut Pro. It came with paper labels for the upper buttons, but for my needs I was missing two labels. And the lower six buttons have no labels. I thought I'd use my Silhouette to solve the problem.

Using Silhouette Studio (I use Business edition, see .studio3 file - will probably load in any edition) the upper buttons were super easy to make. The lower buttons were more of a challenge for me, so I used Fusion 360 to draw the labels for the lower buttons. I've included the Fusion 360 file (.f3d file). The output from Fusion 360 is all-buttons.dxf. I then convert this to all-buttons.svg which I then import into the Silhouette Studio project.

IMPORTANT NOTE: If you don't use Silhouette Studio, you can probably re-draw the upper buttons very quickly and you can probably use my all-buttons.svg or .dxf file to more quickly get a solution working in any tool such as Cricut.

The Studio project uses "Print and Cut". I printed onto glossy 8.5x11 sticker paper (I used https://www.amazon.com/gp/product/B000VKV2H4). I used Krylon clear to spray several light coats to increase the lifetime of the labels. I then cut out the labels project on my Silhouette Cameo 2.

I wiped down the ShuttlePRO v2 buttons with alcohol. I carefully I removed the labels and affixed to the ShuttlePRO v2 taking care to place correctly the first time and to not touch the adhesive with my fingers.