Laptop Stand Smoother

I bought the Nulaxy Laptop Stand laptop stand from Amazon, the

https://www.amazon.com/gp/product/B07P54RSPY

I really like the stand it's super solid. But I feel like the edges on the base are a bit sharp for sliding sensitive in the middle. So I made a smoother to cover the front of the base.

NOTE: LET THE PART COOL! The top of the model, which is face down to the printer when you print it, is pretty thin. If you pull these right off a heated bed, the (still warm) print may warp. After printing, let the bed/part cool down before removing it.

The edges have fillets/chamfers. These should print OK even at 0.2mm, but I printed at 0.15mm to better support (especially) the fillet.

Orientations of the .STL files should be "ready to print". A Fusion 360 export file is provided. Mostly parameterized.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.15

Infill:

Filament: Prusa Prusament PLA, 1.75 Mystic Green How I Designed This ===================

Measure. Draw in Fusion. Revise. Revise. Revise.