Ikea Kallax shelf connector (in mm)

This is a no change version of the model by MasterNBC, except the original version had units in meters or some-such. When I put the STLs in PrusaSlicer it offered to covert them to the somewhat more standard millimeters. I said Yes and then saved them back out.

So the version here should be identical to the original but in millimeters, so they should be easier to import into many slicers.

I printed and installed these and am happy with the results.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

100%

Filament: Hatchbox PLA Black

Notes:

At 0.3mm layer height the logo on the "final" model mostly disappears, that's all interior and doesn't make any difference.

I didn't design this. I took the original STL files, imported them into PrusaSlicer. Allowed PrusaSlicer to re-do the units to millimeter. Saved the STLs to share here.