Customizable Decking / Shelving / Plank spacer

A customizable spacer for placing between planks on decking or shelving to provide a consistent gap for the project. Print two, three or more as required, depending on the length of plank and fixing points you are using.

I've included STLs for 2mm to 8mm gaps, then 10mm to 30mm in 5mm increments, but you can use the customizer to make your own and change other dimensions as required. This was designed to print easily (no supports) which is why the finger pull (to retrieve the spacer) is on one side. Print that against the bed.

Use a bright filament so you can find them, but it can be PLA, ABS, PETG, whatever - it doesn't matter.

Print Settings

Printer:

Prusa Mk2.5

Rafts:

Supports:

No

Filament:

Bright Orange