Shaw BlueCurve Modem wall bracket

This bracket allows you to wall mount a Shaw BlueCurve cable internet modem. (Technically the Fibre+ Gateway 2.0 (XB7) )

Generically: Technicolor | CommScope CGM4331SHW | TG4482.

Mount to the wall with #6 wood screws. Mount the base, place the modem, slide the ring over the top of the modem and secure to the wall.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2mm (not required)

Infill:

100% (see note)

Filament: Priline 2021 PLA Black

Notes:

I actually set walls to 99 so it would print solid.
You can print with infill of 100% or less if you wish.

How I Designed This

Design

Fusion 360 free version
Digital caliper

Model the modem first then design the bracket around it.

Guesswork (fillet radii, etc.)

Trial & Error

Cut curved pieces from the design in Fusion 360 and printed the piece(s) to test fit on the device. Proceed if it worked, correct design and re-print if it didn't.