Moon Medallions - All Phases

A friend wanted to a wall hanging with all the phases of the moon and there didn't seem to be anything ready made for it so I designed this.

Default Size:

90mm diameter (plus a little for the hanging loop)

2mm thick (1mm black background, 1 mm white/silver for the moon; New Moon is only 1mm thick)

It is designed to be printed with a filament change after the base circle has been printed and before the moon itself is printed. The 2mm thickness was chosen so I could set a layer of 0.2mm and 5 skins top and bottom and get a solid model.

If you want thicker just scale up the Z axis. And if you change the diameter up or down (X/Y axis) consider setting the Z axis independently so it doesn't get too thick or too thin.

Also included are 'moon only' models. To use these print a 'New Moon', which is just the black background) and glue a 'moon only' to it with a bit of superglue. This saves the hassle of doing a filament change but getting the moons lined up might be tricky.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2 Adaptive

Infill:

Filament: Tinmorry PLA Black & Silver

Notes:

I made circles in Tinkercad!