Oriel/Hummingbird Feeder

Set on a patio table, or hang from a pole. 

Dimensions 

Length- 143.74mm
Width-  149.37mm
Height-   39.00mm

My Print Settings

Printer:                   Stock Ender 5 plus
Slicer:                              Cura 4.13
Layer Height:                   .2mm
Wall Thickness:               1.2mm
Top/Bottom Layers:         1mm
Infill:                                   20%
Infill Pattern:                   Gyroid
Material:                            PLA
Material Brand:              COEX
Nozzle Temp:                   222c
Support:                           none
Build Plate Adhesion:     Brim
Print Time:                   5 hours 9 minutes

Other Notes

Flat bottom for easy printing, small brim to prevent curling of thin parts, or use a little bed adhesive. No supports needed.