100mm VESA Mount for Shuttle XS35

A bracket to affix a Shuttle XS35 nettop computer to an anything with VESA 100mm mount holes. The computer slides in from the back (the top as pictured/printed), and "locks" in with bumps that fit into depressions in the computer case. One at the bottom center, and one at the top side. I would have put in a something to hold it at the back, but the computer is 250mm long, and my printer has about 248mm of Z. Designed to print with no supports and probably best at 100% infill.

Should also work for anything box-shaped that has one surface that's about 154 x 33 mm.

Print Settings

Printer Brand:

PrintrBot

Printer:

Play

Rafts:

No

Supports:

No

Resolution:

Any

Infill:

High