Printrbot Simple Pro (New Simple / 1608 / Simple v2 / Simple 2016 (yes, really)) Ball and Socket Raspberry Pi Camera Mount

A remix of https://www.thingiverse.com/thing:2773810 by MoonDoggy (https://www.thingiverse.com/MoonDoggy/about) and https://www.thingiverse.com/thing:2739523 by https://www.thingiverse.com/goofdad goofdad.

I included all the parts from https://www.thingiverse.com/thing:2773810 for your convenience, but you don't need to print MK3_Camera_Arm_Ball as that's the part that merged with the strain relief.

EDIT: Beefed up post that the ball on the strain relief piece sits on. And, more importantly cut a hole for access to the build plate screw under the cable guide.

EDIT THE SECOND: Original mount holds camera from the side, not the bottom, so until I move the camera peg, you'll need an extra ball & socket to make a 90 degree turn.

How I Designed This

I just cut the bottom of the bed mounting piece and mixed that with the strain relief piece in Microsoft's 3D builder, which is actually really nice for simple things like this.