CNC 3018 Pro - USB Endoscope Camera Holder

Camera holder primary for a 3018 Router but can be used anywhere.

This will fit a 7-8 mm USB camera similar to this: https://www.amazon.com/Inspection-Endoscope-Borescope-Smartphone-Stylustar/dp/B087722FPS/ref=sr_1_51?dchild=1&keywords=usb+endoscope+camera&qid=1604510972&sr=8-51

I´ve included 2 camera mounts. One closed and another open to fit slightily bigger cameras.

All screws are 3mm.

Part_A should me glued to the base with CA glue or similar, I didn´t get good results with double-side tape.

Part_F is a lens protection mount, I´ve used a small acrylic piece I had laying around and glued it so any metal bit that eventually flys to the camera won´t damage the lens.

Please enjoy!

If you like my work please consider supporting it.

Print Settings

Printer:

Zonestar 802N with Mix Head

Rafts:

Supports:

No

Resolution:

Infill:

50% or more

Filament:

Orange

Notes: