Thermometer Hygrometer Magnetic Mount Holder

This is a simple mount for a common round thermometer hydrometer. There are three versions. Two for use with adhesive magnets, one will orient correctly for left and right mounting and the other for top or bottom. The third version is for use with double sided tape. The magnets are a slight interference fit but if you press around the edges they will slip in and that provides a good fit and finish.

They print as positioned in the stl without support. There is one small bridging at the top edge of the magnet inset.

Magnets I used (20x20x2mm) https://www.amazon.com/gp/product/B06XYLCSQ3

Thermometer hydrometer I used https://www.amazon.com/gp/product/B07FCPJRFH

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

300

Infill:

20

Filament: Generic PLA