Samsung Watch3 Parametric stand

Horizontal support for battery charger for Samsung Watch 3 (and probably Watch 4)
0m
2× print file
0.20 mm
0.40 mm
0.00 g
6
35
1
479
updated May 7, 2022

Description

PDF

//italian //English

 

//Italian
In rete si trovano molti supporti di ricarica per orologi ma sono quasi tutti verticali.
Il design di Kristjan ha invece il pregio di essere orizzontale con tutti i vantaggi che comporta: 
è facilmente trasportabile e non occupa spazio in valigia o nella borsetta dei cavi USB.
Partendo da questo abbiamo sviluppato un nostro modello in OpenScad (il nostro primo modello in OpenScad !) 
in modo che sia facilmente adattabile anche ad altri orologi semplicemente cambiando le dimensioni degli anelli che lo compongono.
Altra modifica che abbiamo fatto in questo remix è di prevedere due uscite per il cavo della batteria:
una di lato e una sotto il cinturino per i comodini affollati.
I commenti nel codice sono ancora in Italiano ma contiamo di rilasciare a breve una versione commentata in Inglese.

Altra modifica che stiamo sviluppando è di rendere parametrici i due fori di uscita del cavo.
Anche se non tutto è ancora parametrico è molto facile modificare il modello provando a modificare le variabili o le costanti anche se è la prima volta che si lavora con OpenScad.
Con F5 viene rigenerato un primo preview, con F6 viene fatto il rendering e con F7 viene generato il file .STL da passare allo Slicer.

Il modello arancione è per caricaa batteria originale Samsung da 33,6mm e bordo basso con i pulsanti laterali protetti ma utilizzabili, mentre il modello blu è per carica batterie preso su Amazon, leggermente più grande, da 33,6mm e con bordo molto alto che copre e protegge completamente i pulsanti laterali.

Galaxy Watch 4 si trova nei modelli da 40 e 44 mm, e Watch 4 Classic,  nei modelli da 42 o 46 mm.
Non conosco il diametro del caricabatterie originale Samsung per Watch 4 ma dovrebbe essere simile se non identico a quello del 3.

Parametri di stampa Profile 0.20 speed - infill 20% - no supports - no brim

Il file pubblicato è per il modello da 45mm con cinturino aperto

//English
On the net there are many watch winders but they are almost all vertical.
Kristjan's design, on the other hand, has the advantage of being horizontal with all the advantages it entails: 
it is easily transportable and does not take up space in the suitcase or in the USB cable bag.
Starting from this we have developed our model in OpenScad (our first model in OpenScad!) 
So that it is easily adaptable to other watches by simply changing the size of the rings that compose it.
Another change we made in this remix is to provide two outputs for the battery cable, 
one on the side and one under the strap for crowded bedside tables.
The comments in the code are still in Italian but we plan to release an English commented version soon.
Another modification we are developing is to make the two cable exit holes parametric.
Even if not everything is parametric yet it is very easy to modify the model by trying to modify the variables or the constants 
even if it is the first time you are working with OpenScad.
With F5 a first preview is regenerated, with F6 the rendering is done and with F7 the .STL file to be passed to the Slicer is generated.

The orange model is for Samsung original 33.6mm battery charger and low edge with protected but usable side buttons, while the blue model is for battery charger taken on Amazon, slightly larger, 33.6mm and with a very high edge that completely covers and protects the side buttons.

Galaxy Watch 4 is found in 40 and 44mm models, and Watch 4 Classic, in 42 or 46mm models.
I don't know the diameter of the original Samsung charger for the Watch 4 but it should be similar if not identical to that of the 3.

Print parameters: Profile 0.20 speed - infill 20% - no supports - no brim

The published file is for the 45mm model with open strap

Tags



Model origin

The author remixed this model.

License