Deltaprintr Strud clamp

This is a Strud-clamp for the Deltaprintr.

Usefull as cable-management.

I reuploaded the clamp as a .stl file since some problems experienced with the dimensions. See the pictures for the dimensions.

I printed it at 50mm/s 100%infill

Also did a scale in Z-axis by 3 times see second picture

Print Settings

Printer Brand:

Deltaprintr

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.20

Infill:

Notes:

There are no special settings needed.

You can print it at 100% infill with a speed of 20mm/s and it should take about 5 minutes to print.

It is a pretty small part so you may want to cool it as it otherwise may soften and melt a bit.