This is a slick looking customizable cup holder. It was designed after some other examples i've seen for board game tables, and made to be easily printable. You can customize it as you'd like for your needs, but note that i haven't really tested it with other dimensions.
2020-07-16
The source code is available for modification here: https://github.com/gord888/GameTableCupHolder
The STLs attached here are what I used for my game table. The thickness is sufficiently adjustable to work on ikea desks including the Galant and Skarsta. Most folks will probably want to customize it to fit their table.
You'll need openscad to do this.
nut) 5. adjust the bolt length in the nut job scad file. 6. print the 4 bolts, and 12 nuts 7. assemble like the picture 8. optionally, you may want to print the bottom plate for the cup holder. My kids have small
cups that would just fall through otherwise. You won't need the bottom plate for typical drinking glasses.
Bolts/Nuts provided are from here: https://www.thingiverse.com/thing:193647
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10% rectangular
Filament: filaments.ca PETG or PLA white
Notes:
These are the minimum number of layers and perimeters:
* 5 top layers * 5 bottom layers * 3 perimetersThe above settings work for bolts also, but if you are experiencing bolt/nut failure, use more perimeters.
Category: Toy & Game AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.