Venom Symbiotic Spider-Man Web Only. Let's Retract!

loved the stringing that looks like web!! Thanks a lot

Blew my sock off! Literally (picture)!Transparent PETG. Dried and printed without changing any retraction settings or flow settings. Kobra 2 max 350mm tall. Not complete yet but the stringing seems to pull off super easy. Can't wait!! Nice file and without any setting changes and some cleanup printing was very pleasant.

does this need supports

Thank you icz.
The only thing better than your skills is your beauty.
Printed with prusment petg transparent at 260 C. 1.5mm height, settings with automatic volumetric speed and 50% speed dial directly on printer menu. Retraction 2mm, 1st outside perimeter

Spidey senses tingling

Such a cool design. Looks amazing.

And at 250mm, Galaxy Red ASA by Polymaker. 0.25 height/0.5 width.

Had some Polymaker ASA Galaxy Red on the printer so gave this model a shot. I work with Marvel characters so this is a great gift!
I used Prusa EasyPrint with 3 perimeters/top/bottom layers, no support or brims, everything default.
A slight bit of stringing here and there, nothing that can't easily be tidied.

A great test for your printer! (edited)

Perfect Print

I attempted to print this without supports, and it turned out decent considering my limited experience. I used a brim as well for adhesion and I am happy with the results. I need to clean it up a little bit but this file is super cool!

280% Scale - 5hr print no support - Thanks for ur stl