Shelly Plus Case By Ripe3D

Shelly Plus Case, Designed for the Plus 1PM but also works with the Plus 1, Plus 2 PM and Plus i4

Available to purchase from https://www.ebay.co.uk/itm/275227283327

Designed to be printed with a 0.6mm nozzle with a 0.68mm wall width.
Also prints fine with smaller nozzles and wall widths.

Requires 4 Prints,

• 1 x Top
• 1 x Bottom
• 2 x Clips.

Requires; 

• 4 x M3 10mm screws for the cable clips.
• 2 x M3 6mm screws for fixing the top.
• 1 x terminal block to join earths