Volelab Aquila Filament Guide

Here is a simple bracket that is designed to bolt to the extruder mount where there are 2x m3 holes.

Its designed to be used with the relocation bracket to mount the spool holder to the rear left side of the printer.

Need 2x M3 countersunk bolts

Print Settings

Printer:

Voxelab Aquila

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament:

any

Notes:

printed flat with no supports or raft, but your printers settings may need to be changed