uBitX Case for PLA

This is a remix of John's excellent uBitX case designed for PET, which you can find here:

https://www.thingiverse.com/thing:2732866

Changes include:

Closures using 3mm self tapping screws, instead of clamshell style latches.

Clearances for fitting parts and through holes made slightly looser, to accommodate the stiffness of the PLA.

I have included a link to the original posting, you can get the custom knobs and microphone holder from there.

I also added an alternative case back, with an additional hole to accommodate a 13mm round fuse holder.

Thanks to John for graciously sharing his Fusion 360 project to allow this remix.

Print Settings

Printer Brand:

Robo 3D

Printer:

R1 ABS + PLA Model

Rafts:

Yes

Supports:

No

Resolution:

0.2

Infill:

30%

Notes:

If you print the custom knobs in PLA, try increasing the size in your slicer by 5 - 10% for an easier fit.